MKU PA 3CM-2W C- Power Amplifier
10000 ... 10500 MHz • 2 W
Linear Power Amplifier for 10 GHz
Linear Power Amplifier for 10 GHz
Technical specifications
Frequency range | 10000..10500 MHz |
Input power | typ. 17 dBm |
Maximum input power | +20 dBm |
Saturation power | min. 2 W |
Gain (small signal) | typ. 20 dB |
Harmonic rejection | typ. 40 dB @ 33 dBm |
Supply voltage | +9 ... 14 V DC |
Current consumption | max. 1.5 A |
Operating case temp. range | -20 ... +55 °C |
VSWR of load | max. 1.8 : 1 |
Input connector / impedance | SMA-female / 50 ohms |
Output connector / impedance | SMA-female / 50 ohms |
Case | milled aluminium |
Dimensions (mm) | 50 x 30 x 17 |
Weight | 50 g (typ.) |
Features
- GaAs-FET-technology
- High linearity
- Good harmonic rejection
- High bandwidth
- Reverse polarity protection
- Monitor output for forward power detection (DC voltage)Small mechanical dimensions
Applications
- Analog and digital transmission systems
Important notes
Please notice the following:
- The technical specifications refer to room temperature.
- The power amplifier doesn’t contain any coaxial relays.
- The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
- Further information about dimensioning of heat sinks is available on our FAQ site.
Industrial use
Our power amplifiers of the MKU-series are exclusively intended for amateur radio applications and will only be sold to radio amateurs with a licence. These products are specified for amateur radio requirements and are not designed for industrial applications. Please notice our list of industrial products or ask for a special version.
Downloads