MKU UP 2424 B, Oscar Phase 4 Up-Converter
2400 ... 2402 MHz
Stand-alone up converter for the OSCAR PHASE 4 geostationary satellite
144 MHz IF
Fully remote controllable
New features:
Stand-alone up converter for the OSCAR PHASE 4 geostationary satellite
144 MHz IF
Fully remote controllable
Firmware update is available in the "Download" tab below!
New features:
- includes additional module for optimized frequency generation
- synchronization by external 10 MHz-reference signal ( SMA-connector )
- enhanced frequency stability (+/- 0.5 ppm between 0°C and 60°C )
- various IF-frequencies in 2m- and 70cm ham radio bands
Technical specifications
Frequency range (IF) | 144 ... 146 MHz / 432 ... 434 MHz |
Input power (IF) | 0.5 ... 5 W (adjustable) |
Frequency range (RF) | 2400 ... 2402 MHz |
LO frequency | 1968 MHz / 2256 MHz |
LO accuracy @ 18 °C | typ. +/- 1.5 ppm |
LO frequency stability | typ. +/- 0.5 ppm (0°C ... 60°C) |
Output power (Psat) | min. 20 W |
Harmonic rejection | min. 60 dB |
Supply voltage | +13.8 V DC (+12 ... 14 V DC) |
Connector supply voltage | SUB-D 9-pole |
Current consumption | typ. 7 A (TX) |
Reference frequency input | 10 MHz / 2 ... 10 mW |
Input connector / impedance | BNC-female / 50 ohms |
Ref. input con. / impedance | SMA-female, 50 ohms |
Output connector / impedance | N-female, 50 ohms |
Dimensions (mm) | 165 x 206 x 67 |
PTT control | Contact closure to ground or +12 V on the IF cable |
Features
- Integrated TCXO
- LDMOS power amplifier with low pass filter for good harmonic suppression
- Power indicator on the front panel
- Protection against bad VSWR and over temperature
- includes additional module for optimized frequency generation
- synchronization by external 10 MHz-reference signal ( SMA-connector )
- enhanced frequency stability (+/- 0.5 ppm between 0°C and 60°C )
- various IF-frequencies in 2m- and 70cm ham radio bands
Applications
- Up-Converter for the geostationary satellite OSCAR PHASE 4
- For DATV usable