MKU 13 G4, 23 cm Transverter
1,3 GHz Transverter
Adjustable IF
Adjustable IF
| RF range | 1296 ... 1298 MHz |
| IF range | 144 ... 146 MHz |
| - | 50 ... 52 MHz |
| - | 28 ... 30 MHz |
| IF input power | 0.5 ... 5 W, adjustable |
| LO accuracy @ 18 °C | typ. +/- 1.5 ppm (without ext. ref.) |
| LO frequency stability (0 ... +40 °C) | typ. +/- 0.5 ppm (without ext. ref.) |
| Output power | min. 1 W |
| RX gain | typ. 20 dB |
| Noise figure @ 18 °C | typ. 0.6 dB |
| External reference input | 10 MHz / 2 ... 10 mW (sine or square wave) |
| Reference input connector | SMA-female, 50 ohms |
| PTT control | contact closure to ground or +12 V on the IF-cable |
| Supply voltage | +13.8 V DC (+12 ... 14 V DC) |
| Current consumption | typ. 1 A (TX) |
| Case | milled aluminium |
| Dimensions (mm) | 100 x 60 x 13 |
| IF connectors / impedance | SMA-female, 50 Ohms |
| RF connectors / impedance | SMA-female, 50 ohms |
| Weight | 140 g (typ.) |
- Input for an external 10 MHz reference source
- Internal stabilized oscillator (can be used instead of 10 MHz reference frequency)
- Switchable IF frequency (144 ... 146 MHz, 50 ... 52 MHz, 28 ... 30 MHz)
- Very high spurious and harmonic rejection even at 28 MHz IF
- IF range for RX and TX independent configurable
- Big attenuator at the IF input for input power up to 5 watts
- Fuses are self-resettable (polyfuses)
- Super low noise converter in the receive path
- Transmit gain and receive gain separately adjustable
- Control output for additional amplifier stages or a coaxial relay
- Adjustable sequencer delay
- PTT can be switched by a voltage on the IF connector or by connecting the PTT pin to ground
- Detector output (DC voltage) for monitoring the output power
- Low power IF mode
Included accessories:
Female header 1 piece 2x 13 mm
1 piece 2x 4 mm
As a 10 MHz frequency source we recommend the 10 MHz GPS-Frequency Standard by ID Elektronik, DK2DB
- 10 MHz GPS-Frequency Standard (ID Elektronik, DK2DB)
Female header 1 piece 2x 13 mm
1 piece 2x 4 mm
As a 10 MHz frequency source we recommend the 10 MHz GPS-Frequency Standard by ID Elektronik, DK2DB
- 10 MHz GPS-Frequency Standard (ID Elektronik, DK2DB)
