KU PA 180190-6 A, Leistungsverstärker

KU PA 180190-6 A, RF Power Amplifier

1800 ... 1900 MHz • 6 W
net: 167,23
193,99
incl. 16% Vat. plus shipping
Available from stock
Frequency range1800..1900 MHz
Input power for P1dBtyp. 18 dBm
Maximum input power+22 dBm
Output power P1dBmin. 37.8 dBm (CW) (1)
min. 6 W (CW)
Output power P3dBtyp. 40 dBm
Output power P3dBtyp. 10 W (CW)
Output power COFDM (1)min. 30 dBm
min. 1 W
Gain (small signal)min. 20 dB
Gain flatness (small signal)max. +/- 2 dB
Harmonic rejection min. 27 dB @ 40 dBm
IM3 (2)min. 38 dBc @ 30 dBm PEP
min. 26 dBc @ 37 dBm PEP
Efficiency min. 45 % @ 40 dBm
Supply voltage+28 V DC
Quiescent currenttyp. 180 mA
Current consumptionmax. 0.9 A
Forward detectionyes (diode detector)
VSWR of loadmax. 1.8 : 1
Operating case temp. range-20 ... +55 °C
Input connector / impedanceSMA-female / 50 ohms
Output connector / impedanceSMA-female / 50 ohms
Casemilled aluminium
Dimensions (mm)80 x 60 x 20
Weight150 g (typ.)
(1)Measured with QAM 64, single carrier, EVM: 2%
(2)Measured 2-tone, frequency spacing: 1 MHz
  • LD-MOSFET-technology
  • Reverse polarity protection
  • Analog and digital transmission systems
Please notice the following:
  • The technical specifications refer to room temperature.
  • The power amplifier doesn’t contain any coaxial relays.
  • The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
  • Further information about dimensioning of heat sinks is available on our FAQ site.

Accessories

References