MKU LO 8-13 PLL, Oscillator
54 ... 13600 MHz
- Frequency freely configurable
- Remote control
- Intuitive operation
- High Resolution
- Synchronisable also with other modules
- 1 Hz accurate setting
- Frequency freely configurable
- Remote control
- Intuitive operation
- High Resolution
- Synchronisable also with other modules
- 1 Hz accurate setting
Can also be used as a stand-alone beacon
| Output frequency | 8400 ... 13600 MHz |
| Output frequency 2 | 54 ... 6850 MHz |
| Output power | typ. 20 mW |
| Frequency accuracy @ 18°C | +/- 1 ppm |
| Frequency stability @ 0 40 ° | +/- 1 ppm |
| CW keying (telegraphy) | A1 |
| CW input connector | PIN / Pinheader |
| Phase noise @ 100 Hz | typ. -67 dBc/Hz |
| Phase noise @ 1 kHz | typ. -88 dBc/Hz |
| Phase noise @ 10 kHz | typ. -89 dBc/Hz |
| Phase noise @ 100 kHz | typ. - 99 dBc/Hz |
| Phase noise @ 1 MHz | typ. -124 dBc/Hz |
| External reference frequency | 10 MHz / 2 ... 10 mW (sine or sqare wave) |
| Maximum case temperature | +55 °C |
| Supply voltage | +12 ... 14 V DC |
| Current consumption | typ. 300 mA |
| Input (external oscillator) | SMA-female / 50 ohms |
| Output / Impedance | SMA-female / 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 100 x 60 x 13 |
| Weight | 140 g |
The oscillator unit MKU LO 8-13 PLL was designed as local oscillator source for microwave transverters and covers the frequency range from 8.4 GHz to 13.6 GHz. The oscillator unit covers the frequency range between 54 MHz and 6.85 GHz, also. The user can choose frequencies from a standard frequency list or the user can programm it’s own output frequency in the oscillator unit. The frequency resolution is 1 Hz. Absolute frequency accuracy and stability can be achieved by supplying an external 10 MHz reference frequency. A CW beacon encoder is implemented in the oscillator unit software and so the oscillator can be used a low power stand-alone beacon transmitter.
- Frequency step size 1 Hz
- Temperature compensated crystal oscillator
- CW Keying
- 10 MHz referenz frequency input
- Local oscillator for microwave transverters
- Beacon transmitter
For easy configuration and control of the oscillator unit a 3.2" touchscreen display can be connected.
We provide a suitable software for this display under the downloads tab.
We provide a suitable software for this display under the downloads tab.
