MKU PA 6MM - 1W A, Leistungsverstärker
MKU PA 6MM - 1W A, Leistungsverstärker MKU PA 6MM - 1W A, Kühlkörper MKU PA 6MM - 1W A mit 47 G2 MKU PA 6MM - 1W A mit 47 G2 2 MKU PA 6MM - 1W A mit 47 G2 3 MKU PA 6MM - 1W A mit 47 G2 4 MKU PA 6MM - 1W A mit 47 G2 5 MKU PA 6MM - 1W A mit 47 G2 6 MKU PA 6MM - 1W A mit 47 G2 7

MKU PA 6MM - 1W A, Power Amplifier

47088 ... 47090 MHz • 1 W
Power Amplifier for the Amateur Radio Band 6 mm

Preliminary technical data!

net: 831,09
989,00
incl. 19% Vat. plus shipping
Available from stock
Frequency range47088..47090 MHz
Maximum input power200 mW
Output power (CW)min. 0.5 W (@ 30 mW Pin)
Saturation powertyp. 1 W
Gain (small signal)min. 12 dB
Supply voltage+10 ... 14 V DC
Current consumptionmax. 1.6 A (@ 12 V DC)
Operating case temp. range-20 ... +55 °C
Input connector / impedanceWaveguide R500 / WR19 / WG24
Output connector / impedanceHohlleiter R500 / WR19 / WG24
Casemilled aluminium / brass
Dimensions (mm)50 x 30 x 20
Weight100 g (typ.)
This power amplifier for 47 GHz is based on a 0.15µm pHEMT technology, which allows a very high output saturation power of 1 W typically. The waveguide input is coupled directly to the internal PCB for minimum losses. All internal bias voltages are generated from a single 12 V supply voltage, which is used efficiently by means of a switching regulator. Also, there is an over temperature shutdown implemented. Due to its small mechanical dimensions, this module can be used together with our transverter MKU 47 G2 for building a very compact 47 GHz station with more than 500 mW of output power.
  • 1 W output power on 47088 MHz
  • Milled aluminium case
  • Small mechanical dimensions
  • Over temperature shutdown
  • Uncalibrated monitor voltage
  • PA is not supposed to be used as RX/TX change-over amplifier

Accessories

References