MKU 24 G3, Transverter
NEW - NEW - NEW - NEW
24048 ... 24050 MHz
The new design of our transverter for 24 GHz features better performance and many new functions.
Built-in 2 W Power Amplifier
24048 ... 24050 MHz
The new design of our transverter for 24 GHz features better performance and many new functions.
Built-in 2 W Power Amplifier
| RF range | 24048 ... 24050 MHz |
| IF range | 144 ... 146 MHz |
| IF input power | 0.5 ... 5 W, adjustable |
| ext. LO frequency | 11952 MHz |
| ext. LO input power | 10 ... 30 mW |
| Output power | typ. 2 W, min. 1.5 W |
| Spurious rejection | typ. 30 dB |
| RX gain | typ. 25 dB, adjustable |
| Noise figure @ 18 °C | typ. 3.5 dB, max. 4 dB |
| PTT control | contact closure to ground or +12 V on the IF-cable |
| Supply voltage | +13.8 V DC (+12 ... 14 V DC) |
| Current consumption | typ. 120 mA (RX) / max. 2 A (TX) |
| Case | aluminium |
| Dimensions (mm) | 130 x 59 x 18 |
| IF connectors / impedance | SMA-female, 50 Ohms |
| RF connectors / impedance | SMA-female, 50 ohms |
| Weight | 220 g (typ.) |
New features of the transverter MKU 24 G3
Well-tried functions and features - based on MKU 24 G2
- Bulit-in 2 W Power Amplifier
- Usage of an image rejection mixers for better image rejection
Well-tried functions and features - based on MKU 24 G2
- Fuses are self-resettable (polyfuses)
- IF input power up to 5 W
- Built-in image rejection filter
- Transmit gain and receive gain separately adjustable
- Control output for additional amplifier stages or a coaxial relay
- PTT can be switched by voltage on the IF connector or by connecting the PTT pin to ground
