MKU PA 3CM-2W B - Power Amplifier
10300 ... 10400 MHz • 2 W
Power Amplifier for the Amateur Radio Band 3 cm
Power Amplifier for the Amateur Radio Band 3 cm
Technical specifications
Frequency range | 10300..10400 MHz |
Input power | typ. 200 mW |
Saturation power | min. 2,5 W |
Gain (small signal) | typ. 10 dB |
Harmonic rejection | 32..34 dB @ 33 dBm |
Supply voltage | +12 ... 14 V DC |
Current consumption | typ. 1.6 A |
Operating case temp. range | -20 ... +55 °C |
VSWR of load | max. 1.8 : 1 |
Input connector / impedance | SMA-female / 50 ohms |
Output connector / impedance | SMA-female / 50 ohms |
Case | milled aluminium |
Dimensions (mm) | 50 x 30 x 17 |
Weight | 50 g (typ.) |
Features
- Detector output (DC voltage) for monitoring forward output power
- Small mechanical dimensions
Applications
- Suitable for all analog and digital modes (SSB, CW, ATV, DATV)
Important notes
Please notice the following:
- The technical specifications refer to room temperature.
- The power amplifier doesn’t contain any coaxial relays.
- The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
- Further information about dimensioning of heat sinks is available on our FAQ site.
Industrial use
Our power amplifiers of the MKU-series are exclusively intended for amateur radio applications and will only be sold to radio amateurs with a licence. These products are specified for amateur radio requirements and are not designed for industrial applications. Please notice our list of industrial products or ask for a special version.
Downloads