MKU 23 G4, 13 cm Transverter
NEW - NEW - NEW
Multiband 13cm Transverter
2,3 GHz Transverter for EME
Uplink for the geostationary satellite Es'HailSat-2
Multiband 13cm Transverter
2,3 GHz Transverter for EME
Uplink for the geostationary satellite Es'HailSat-2
| RF range | 2320 ... 2322 MHz |
| - | 2304 ... 2306 MHz |
| - | 2300 ... 2302 MHz |
| - | 2400 ... 2402 MHz |
| IF range | 144 ... 146 MHz |
| - | 146 ... 148 MHz |
| IF input power | 0.5 ... 5 W, adjustable |
| LO accuracy @ 18 °C | typ. +/- 2 ppm, max. +/- 3 ppm (without ext. ref.) |
| LO frequency stability (0 ... +40 °C) | typ. +/- 2 ppm, max. +/- 3 ppm (without ext. Ref.) |
| Output power | typ. 1 W |
| RX gain | typ. 20 dB |
| Noise figure @ 18 °C | typ. 1.5 dB |
| External reference input | 10 MHz / 2 ... 10 mW (sine or square wave) |
| Reference input connector | SMA-female, 50 ohms |
| PTT control | contact closure to ground or +12 V on the IF-cable |
| Supply voltage | +13.8 V DC (+12 ... 14 V DC) |
| Current consumption | typ. 1 A (TX) |
| Case | milled aluminium |
| Dimensions (mm) | 100 x 60 x 13 |
| IF connectors / impedance | SMA-female, 50 Ohms |
| RF connectors / impedance | SMA-female, 50 ohms |
| Weight | 140 g (typ.) |
Find a detailed description under downloads.
- Input for an external 10 MHz reference source
- Internal stabilized oscillator (can be used instead of 10 MHz reference frequency)
- Four switchable frequency bands in the 13 cm band
- RX and TX frequency range independent configurable
- Big attenuator at the IF input for input power up to 5 watts
- Fuses are self-resettable (polyfuses)
- Super low noise converter in the receive path
- Transmit gain and receive gain separately adjustable
- Control output for additional amplifier stages or a coaxial relay
- Adjustable sequencer delay
- PTT can be switched by a voltage on the IF connector or by connecting the PTT pin to ground
- Detector output (DC voltage) for monitoring the output power
- EME
- Uplink for the geostationary satellite Es'Hail-2
- RX-TX switching of DB6NT transverters
Included accessories:
Female header 1 piece 2x 13 mm
1 piece 2x 4 mm
As a 10 MHz frequency source we recommend the 10 MHz GPS-Frequency Standard by ID Elektronik, DK2DB
- 10 MHz GPS-Frequency Standard (ID Elektronik, DK2DB)
Female header 1 piece 2x 13 mm
1 piece 2x 4 mm
As a 10 MHz frequency source we recommend the 10 MHz GPS-Frequency Standard by ID Elektronik, DK2DB
- 10 MHz GPS-Frequency Standard (ID Elektronik, DK2DB)
