MKUPA2M-60WHY-2

MKU PA 2M-60W HY-2, VHF-MOSFET Power Amplifier

144 ... 146 MHz • 60 W
VHF MOSFET Power Amplifier for the Amateur Radio Band 2 m
Designed for usage with SDR Flex 6700

net: 295,80
352,00
incl. 19% Vat. plus shipping
Available from stock
Frequency range144..146 MHz
Input powertyp. 5 dBm
Maximum input power8 dBm
Saturation powertyp. 60 W
Harmonic rejection typ. 60 dB
Supply voltage+12 ... 14 V DC
Quiescent currenttyp. 4 A
Current consumptionmax. 12 A
Operating case temp. range-20 ... +55 °C
VSWR of loadmax. 1.8 : 1
Input connector / impedanceSMA-female / 50 ohms
Output connector / impedanceN-female / 50 ohms
Casemilled aluminium
Dimensions (mm)130 x 60 x 20
Weight270 g (typ.)
  • Good linearity
  • Built-in low pass filter for good harmonic rejection
  • Reverse polarity protection
  • Monitor outputs for forward and reverse power detection
  • Analog transmissions systems
  • Power amplifier for radio amateur applications (SSB, CW)
  • Designed for usage with SDR Flex 6700
Please notice the following:
  • Recommended output power for radio amateur applications: Modulation type: CW/FM up to 60 W, SSB up to 20 W
  • The technical specifications refer to room temperature.
  • The power amplifier doesn’t contain any coaxial relays.
  • The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
  • Further information about dimensioning of heat sinks is available on our FAQ site.
Please notice the following:Recommended output power for radio amateur applications: Modulation type: CW/FM up to 60 W, SSB up to 20 W
The technical specifications refer to room temperature.
The power amplifier doesn’t contain any coaxial relays.
The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
Further information about dimensioning of heat sinks is available on our FAQ site.

Accessories

References