MKU PA 3CM-8W A, GaAs-Fet Power Amplifier
10300 ... 10400 MHz • 8 W
Power Amplifier for the Amateur Radio Band 3 cm
Power Amplifier for the Amateur Radio Band 3 cm
| Frequency range | 10300..10400 MHz |
| Input power | typ. 200 mW |
| Maximum input power | 300 mW |
| Saturation power | min. 10 W |
| Gain (small signal) | typ. 17 dB |
| Supply voltage | +12 ... 14 V DC |
| Current consumption | typ. 4 A |
| Operating case temp. range | -20 ... +55 °C |
| VSWR of load | max. 1.8 : 1 |
| Input connector / impedance | SMA-female / 50 ohms |
| Output connector / impedance | SMA-female / 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 130 x 60 x 20 |
| Weight | 250 g (typ.) |
- GaAs FET technology
- High linearity (class A operation)
- Detector output (DC voltage) for monitoring forward output power
- Reverse polarity protection
- Small mechanical dimensions
- Analog and digital transmission systems
Please notice the following:
- The technical specifications refer to room temperature.
- The power amplifier doesn’t contain any coaxial relays.
- The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
- Further information about dimensioning of heat sinks is available on our FAQ site.
Our power amplifiers of the MKU-series are exclusively intended for amateur radio applications and will only be sold to radio amateurs with a licence. These products are specified for amateur radio requirements and are not designed for industrial applications. Please notice our list of industrial products or ask for a special version.
