MKU PA 3CM-60W B WG, GaAs-FET Power Amplifier
10300 ... 10400 MHz • 60 W
Linear Power Amplifier for 10 GHz
Linear Power Amplifier for 10 GHz
| Frequency range | 10300..10400 MHz |
| Input power | typ. 23 dBm |
| Maximum input power | 25 dBm |
| Saturation power | typ. 60 W, min. 55 W |
| Gain (small signal) | typ. 27 dB |
| Gain flatness (small signal) | +/-0.5 dB (typ.) |
| Harmonic rejection | typ. 40 dB @ 47 dBm |
| Over temperature protection | yes |
| Input return loss (S11) | typ. 10 dB |
| ON voltage | +5 ... 14 V DC |
| Supply voltage | +12 ... 14 V DC |
| Quiescent current | typ. 11 A |
| Current consumption | typ. 26 A @ 60 W |
| Forward detection | yes (diode detector) |
| Operating case temp. range | -20 ... +55 °C |
| VSWR of load | max. 1.8 : 1 |
| Input connector / impedance | SMA-female / 50 ohms |
| Output connector / impedance | waveguide R100 / WG16 / WG90 |
| Case | milled aluminium |
| Dimensions (mm) | 158 x 64 x 22 |
| Weight | 400 g (typ.) |
- GaAs FET technology
- High linearity (class A operation)
- Detector output (DC voltage) for monitoring forward output power
- Reverse polarity protection
- ON / OFF control with DC voltage
- Small mechanical dimensions
- Over temperature protection
- Analog and digital transmission systems
Please notice the following:
- The technical specifications refer to room temperature.
- The power amplifier doesn’t contain any coaxial relays.
- The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
- Further information about dimensioning of heat sinks is available on our FAQ site.
Our power amplifiers of the MKU-series are exclusively intended for amateur radio applications and will only be sold to radio amateurs with a licence. These products are specified for amateur radio requirements and are not designed for industrial applications. Please notice our list of industrial products or ask for a special version.
