/ / /
Back to itemlist
Printversion (PDF)
Individual Request
Arctic Silver 5 - Wärmeleitpaste

2 x Arctic Silver 5,

High perf. heat conductive paste


As an enhancement of the Arctic Silver 3 the new heat-conductive paste Arctic Silver 5 features a heat conductance of 9.0 W/mK and better. Ranking first on the market of high performance heat-conductive pastes this product is intended to be used together with cooling actions of high-power amplifiers. The aim is to extend lifetime and to achieve better efficiency by operating amplifiers and transistors with lower temperatures. The applicable temperature range is - 50 ... + 130 °C.
Due to optimum consistency the application is easy to handle.
Available from stock
Amount: 3.5 g
Thermal resistance: 0.0127 °C - cm²/W
Heat conductance: 9.0 W/mK and better
 
  • contains 99,9% silver
  • contains silver-, aluminium and zinc oxide
  • Depending on the used heatsink and the operating behaviour of the system the run-in period can extend up to 200 hours!
In a most common communication system, frequency conversions are performed in both transmitting and receiving side to move the baseband signal to the RF band and vice versa. The conversion is performed on basic by multiplying the baseband signal and a sinus signal, which is provided by the local oscillator (LO). The LO offers repetitive signals without input signals and is one of the key components in the whole HF transceiver.
The frequency bands are narrow and occupied by different communication standards. To achieve a high-quality communication, the LO signal should be pure and stable, and in some case also tunable, to move signals from different frequencies to the same frequency. Therefore, the most common implementation of the LO module is the phase-lock loop (PLL).
Kuhne electronic provide varieties of external LO modules, using different oscillators including VCXO (Voltage-Controlled Crystal Oscillator), TCXO (Temperature-Controlled Crystal Oscillator) and so on. These products support different microwave transverters for different frequency bands with high quality. Especially for the radio amateurs we provide 116 MHz LO for eg. 2-meter-band transverter, 12672 MHz LO for eg. 23-cm-band transverter etc. The output power of the local oscillator module is from 1 mW to 20 mW to match the power requirement of the mixer. Our LO modules are stable and accurate considering the changing temperature factors. In case a more accurate signal is needed, users can connect an external 10 MHz signal to the LO module as reference.Some using cases are given here as examples: the MKU LO 12, 24 GHz Local oscillator module (LO) together with the 24 GHz transverter MKU 24 G2 144, transmit the IF 144 MHz to the 24 GHz band, which includes scientific, Industrial and Medical (ISM) band from 24 GHz to 24.25 GHz. Another application is 76 GHz transverter MKU 76 G2 combining with external local oscillator MKU LO 8-13 PLL, can be used in Radar communication such as automobile communication. Other applications please check our homepage.