MKU PA 3CM-30W B, GaAs-Fet Power amplifier
10000 … 10500 MHz • 30 W
Linear Power Amplifier for 10 GHz
Linear Power Amplifier for 10 GHz
| Frequency range | 10000..10500 MHz |
| Maximum input power | +7 dBm |
| Saturation power | min. 30 W |
| Gain (small signal) | typ. 48 dB |
| Over temperature protection | yes |
| ON voltage | +5 ... 15 V DC |
| Supply voltage | +12 ... 14 V DC |
| Current consumption | max. 15 A |
| Forward detection | yes (diode detector) |
| VSWR of load | max. 1.8 : 1 |
| Operating case temp. range | -20 ... +55 °C |
| Input connector / impedance | SMA-female / 50 ohms |
| Output connector / impedance | SMA-female / 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 158 x 64 x 22 |
| Weight | 380 g (typ.) |
- GaAs FET technology
- High linearity (class A operation)
- Detector output (DC voltage) for monitoring forward output power
- Reverse polarity protection
- ON / OFF control with DC voltage
- Small mechanical dimensions- Over temperature protection
- Analog and digital transmission systems
Please notice the following
- The technical specifications refer to room temperature.
- The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
- Further information about dimensioning of heat sinks is available on our FAQ site.
.png)